Samsung OfficeServ 7000 Series Programming Manual Download Page 255

Page: 255 / 487

OfficeServ 7000 Series Call Server Programming Manual

2-217

[616] MGI USER

This program selects which specific MGI ports will be dedicated on a per-port basis for IP

station/trunk devices. If this MMC is not used, allocation of MGI ports will be controlled

by MMC 615. By defining dedicated MGI port usage, the IP station/trunk selected will

always use the port programmed. MGI ports can be assigned for digital stations

(2XX~2XXX), private and public ITP stations (32XX), VoIP Networking trunks (83XX),

H.323 trunks (84XX), SIP trunks (85XX) and MGI3 facsimile. Only one assignment per

MGI port is permitted. Any entries made here will override entries made in MMC 615.

DEFAULT DATA

NONE

ACTION

DISPLAY

1) Press Transfer button and enter 616.

Display shows the first available option:

[3801] MGI USER

NONE

2) Enter MGI dial number.

[3801] MGI USER

NONE

Press Volume button to select an MGI port and press

Right Soft button to move cursor.

3) Enter MGI user dial number.

[3801] MGI USER

NONE

Press Volume button to select an MGI user and press

Right Soft button to store and move cursor.

4) Press Transfer button to save and exit.

Press Speaker button to advance to next MMC.

RELATED ITEMS

NONE

Summary of Contents for OfficeServ 7000 Series








































































































































































































































































































































































































































































































Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands

Samsung OfficeServ 7000 Series, Programming Manual

Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands