Samsung OfficeServ 7000 Series Programming Manual Download Page 75

Page: 75 / 487

OfficeServ 7000 Series Call Server Programming Manual

2-37

(Continued)

Type

Description

CONV INCOM

When incoming call is answered, the specific information is displayed in

the upper line of the phone display.

CLI NUMBER FIRST

According to priority, it displays CLI number or

CLI name or trunk number. If the former is not

valid, the latter has a priority.

CLI NAME FIRST

According to priority, it displays CLI name or CLI

number or trunk number. If the former is not

valid, the latter has a priority.

DDI NUMBER FIRST

According to priority, it displays DDI number or

DDI name. If the former is not valid, the latter has

a priority. If both are invalid, it operates as a CLI

NAME FIRST.

DDI NAME FIRST

According to priority, it displays DDI name or DDI

number. If the former is not valid, the latter has a

priority. If both are invalid, it operates as a CLI

NAME FIRST.

CLI NUMBER/DDI

It displays ‘CLI NUMBER/DDI NUMBER’.

It supports up to 16 characters.

If both are invalid, it displays trunk number.

CLI NAME/DDI

It displays ‘CLI NAME/DDI NUMBER’. It supports

up to 16 characters. If both are invalid, it displays

trunk number.

DDI NUMBER/NAME

It displays ‘DDI NUMBER/ DDI NAME’. It only

supports up to 16 characters. If both are invalid,

it operates as a CLI NAME FIRST.

DDI NAME/NUMBER

It displays ‘DDI NAME/DDI NUMBER’. It only

supports up to 16 characters. If both are invalid,

it operates as a CLI NAME FIRST.

TRUNK NUMBER

Display trunk number only.

TRUNK DISP

When call is answered, trunk number can be displayed or not.

TRUNK:DIGIT

In case of trunk call,

it display ‘<trunk number>: <digit>’.

DIGIT ONLY

In case of trunk call, if it includes the incoming

information that should be displayed, trunk

number is not displayed.

TIME/COST

When call is answered, duration time or cost can be displayed or not.

NO DISPLAY

It does not show any information in the upper

right corner of the phone display.

TIME DISPLAY

It shows duration time in the upper right corner of

the phone display.

COST DISPLAY

The cost of the call in progress will show In the

upper right corner of the phone display.

Summary of Contents for OfficeServ 7000 Series








































































































































































































































































































































































































































































































Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands

Samsung OfficeServ 7000 Series, Programming Manual

Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands