21
The socket-outlet shall be installed near the equipment
and shall be easily accessible.
Do not unplug the power cord out by pulling the cable
only.
Connect and Disconnect the AC
adapter
The power cord set (wall plug, cable and AC adapter plug)
you received with your computer meets the requirements
for use in the country where you purchased your
equipment.
Power cord sets for use in other countries must meet the
requirements of the country where you use the computer.
For more information on power cord set requirements,
contact your authorized dealer, reseller, or service
provider.
Power Cord Requirements
General Requirements
The requirements listed below are applicable to all
countries:
■ The length of the power cord set must be at least 6.00
feet (1.8m) and a maximum of 9.75 feet (3.0m).
■ All power cord sets must be approved by an
acceptable accredited agency responsible for
evaluation in the country where the power cord set will
be used.
■ The power cord set must have a minimum current
capacity of 7 A and a nominal voltage rating of 125
or 250 volts AC, as required by each country’s power
system.
■ The appliance coupler must meet the mechanical
configuration of an EN 60 320/IEC 320 Standard Sheet
C7 connector, for mating with appliance inlet on the
computer.
Summary of Contents for NP-X22
Page 1: ...User Guide X22...
