154
Questions and Answers
This section provides information on possible problems, solutions and other references for system use.
Q
The system does not shutdown properly.
A
When the system does not shutdown normally, press
and hold the
Power
button until the system manually
shuts off. If the Power-Saving Mode is configured
into the
Power
button, press and hold for more than
4 seconds to shut the system off. When the system
is turned on after such manual shutdown, Scandisk
will run to check errors in the system.
Q
The system freezes during program operation.
A1
There is an error with the program currently being
used. Press the
<Ctrl>
,
<Alt>
, and
<Delete>
keys
simultaneously and click
End Task
in the
Windows
Task Manager
window.
A2
There is an error with the Windows OS. Reboot the
system by using the
Power
button.
Q
The LCD screen is too dark or too bright
A
Turn on the LCD backlight or adjust the screen
brightness. Pr
ess
Fn
+ (
) to turn on the LCD
backlight or press
Fn
+ (
),
Fn
+ (
)
to adjust
the scree
n brightness.
Q
The screen saver disturbs screen viewing during
Media Player or video file operation.
A
Click
Tools
>
Options
>
Player
and then clear the
Allow screen saver during playback in the Media
Center
check box.
Q
In the following cases., the screen blinks or
displays noise for a short time (This only applies
to nVidia graphics card.): (Click the Graphics
Related tab, Change Resolution, Change Display
Device, Remove the AC Adapter, Restart the
System, Change PowerMizer level.)
A
This may happen while the video driver is examining
the connected device. While detecting, any
connected display devices may blink or some noise
may occur.
Windows Related
Display Related
Summary of Contents for NP-X22
Page 1: ...User Guide X22...
