Samsung Inkjet SF-430 User Manual Download Page 40

Page: 40 / 190

1.33

ETUP

Using the SmarThru CD-ROM

You can uninstall both the MFP driver and the SmarThru
software with the CD-ROM you used to install the software.

Insert the SmarThru CD-ROM into your CD-ROM drive.

The SmarThru CD-ROM should automatically run and
the opening window appear. (If the opening window
does not appear, select Run from the Start menu, then
type X:Autorun, replacing “X” with the letter of your
drive and click OK.

Click Uninstall the Samsung software on your PC.

Follow the on-screen instructions to complete
uninstallation.

You must shut down and restart your computer before
any changes you have made will come into affect.

Summary of Contents for Inkjet SF-430































































































































































































Search results

Summary of Contents for Inkjet SF-430

Reviews:

Related manuals for Inkjet SF-430

Brands by name

Popular brands

Samsung Inkjet SF-430, User Manual

Search results

Summary of Contents for Inkjet SF-430

Reviews:

Related manuals for Inkjet SF-430

Brands by name

Popular brands