Samsung Inkjet SF-430 User Manual Download Page 42

Page: 42 / 190

1.35

ETUP

Press Enter when the date on the display is correct.

If you enter an invalid number, the product beeps and
does not proceed to the next step. If this happens, just
re-enter the correct number.

The display asks you to enter the time. Use the number
keypad to enter the current time using 24-hour format.

You can change the clock mode to 12-hour format (e.g.
13:00 as 01:00 PM). See page 1.36. Use the Scroll
buttons (

) to select AM or PM in 12-hour mode.

Press Enter when the time on the display is correct.

The display automatically returns to Standby mode.

Current date

Current time

Fax reception mode.
For details, see page 5.14.

Summary of Contents for Inkjet SF-430































































































































































































Search results

Summary of Contents for Inkjet SF-430

Reviews:

Related manuals for Inkjet SF-430

Brands by name

Popular brands

Samsung Inkjet SF-430, User Manual

Search results

Summary of Contents for Inkjet SF-430

Reviews:

Related manuals for Inkjet SF-430

Brands by name

Popular brands