3.9
C
OPY
3
Changing Default Settings
The copy options including copy quality, contrast, number of
copies and copy size can be set to the most frequently used
modes. When a document is copied, the default settings will
be used unless otherwise you do not change for the individual
copy job by using the corresponding buttons on the front
panel.
To create your own default settings:
1
Press
Setup on the front panel. The display shows
“1.SYSTEM SETUP” on the bottom line.
2
Press
Enter.
3
Press the
Scroll buttons (
or
) repeatedly until you
see “SET DEFAULT”.
4
Press
Enter. The display shows the first option
“CONTRAST”.
5
Press the
Scroll buttons (
or
) repeatedly to scroll
through the available setup options.
6
When the desired option appears, press
Enter.
7
Change the setting using the
Scroll buttons (
or
)
and then press
Enter to save the selection.
8
Repeat steps 5 through 7 as necessary.
9
To return to Standby mode, press
Cancel/Reset.
Summary of Contents for Inkjet SF-430
