5.39
F
AX
5
5
Choose the desired status by pressing the
Scroll
buttons (
or
) or enter the desire number using the
number keypad.
6
Press
Enter to save the selection.
7
Repeat from step 1 to set other data options if
necessary. You can exit from setup mode at any time by
pressing
Cancel/Reset.
Selectable Options
These instructions assume you’ve followed the steps under
“Setting an Option” on page 5.38 and the product is
prompting you to change one of the options listed here.
•
SEND FROM MEMORY : If you are annoyed that you
have to wait until documents in the ADF are sent out when
you try to send or reserve another fax, turn this feature on.
With this feature enabled, all transmission documents are
automatically scanned into memory before transmission.
Select ON to turn this feature on. Note that this feature will
be disabled for colour faxing.
Select OFF to turn this feature off.
• SENDING CONFIRM : A message confirmation report
shows whether the transmission was successful or not, how
many pages were sent, etc.
Select ON to print a confirmation report automatically each
time you send a fax.
Select OFF to turn this feature off.
Select ERROR to print only when an error occurs and the
transmission was not successful.
•
FAX PAPER SIZE : Select the paper size you will use for
the recording paper. Sizes available are: LETTER, A4.
LEGAL.
Summary of Contents for Inkjet SF-430
