40
◈ Wireless - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings parameters manually.
1.
Follow the directions in Wireless - Automatic through Step 5.
2.
The Smart Media Player searches for a network, and then displays the connection failed message.
3.
On the bottom of the screen, select
IP Settings
, and then press the
E
button. The IP Settings screen appears.
4.
Select the
IP Setting
field, and then press the
E
button.
5.
Select
Enter manually
in the IP Setting field, and then press the
E
button.
6.
Select a parameter to enter (IP Address, for example), and then press
E
button. Use the number keypad on your remote control to enter the numbers
for the parameter. You can also enter numbers using the
▲▼
buttons. Use the
◀▶
buttons on the remote control to move from entry field to entry
field within a parameter. When done with one parameter, press the
E
button.
7.
Press the
▲
or
▼
button to move to another parameter, and then enter the numbers for that parameter following the instructions in Step 6.
8.
Repeat Steps 6 and 7 until you have filled in all parameters.
▶
You can get the Network parameters from your Internet provider.
9.
When finished, select
OK
, and then press the
E
button. The Security Screen appears.
10.
On the Security screen, enter your network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control.
Enter letters by selecting a letter with the
▲▼◀▶
buttons, and then pressing the
E
button.
11.
When finished, select
Done
at the right of the screen, and then press the
E
button.
The Smart Media Player verifies the network connection and then connects to the network.
12.
After the Smart Media Player verifies the network, select
OK
, and then press the
E
button.
Settings
h
Network
