20
CONNECTING THE POWER
After connecting your Smart Media Player to your TV and audio system, connect the included power adaptor to the Smart Media Player, and then plug the
power adaptor into a wall socket. When you plug in the power adapter for the first time, the Smart Media Player will turn on automatically and display the
Initial Settings screen.
To turn off the product, press the
Power
button on your remote control. To turn it on, press the
Power
button again.
If you turn off the product by pressing the
Power
button on your remote control, the product can be in one of two states:
●
Active Standby mode
: If the
Quick Start
option is set to
On
.
The POWER LED is turned off, but the NETWORK LED will flash on and off, depending on the network status.
●
Deep Sleep mode
: If the
Quick Start
option is set to
Off
.
Both the POWER LED and the NETWORK LED are turned off.
See page 45 for more information about the
Quick Start
option. (The setting you choose impacts the power consumption of the product when it is off.)
Power Adapter
▶
If power is disconnected from the Smart Media Player while it is operating normally, the product will turn on automatically when power is
reconnected.
▶
If you insert a CableCARD into the Smart Media Player, the
Quick Start
option is forced
On
and the Smart Media Player will not enter
Deep
Sleep mode
.
▶
If the Smart Media Player has been turned off or left unplugged for more than 1 week, the device may lose authorization for cable TV services.
To restore cable TV services, please contact your cable service provider.
Connections
h
Connecting the Power
