Samsung DP300A2A-A01US User Manual Download Page 71

Page: 71 / 126

Chapter 3.

Using the computer

Using the Multimedia App

(Optional)

You can enjoy photo, video and music files with the S Camera, S

Gallery and S Player apps.

S Camera

You can take photos and record videos with the S

Camera app, and view them directly in this app.

S Gallery

Only photos or videos recorded with the S Camera

app can be viewed with the S Camera app.

S Player

You can view the photo, video and music files saved

on the computer.

Depending on the version of the program, some functions

may not be provided or different functions may be provided.

Third-party software related services

For descriptions about and service requests for third-party

•

software, please contact the relevant manufacturer.
Some troubleshooting actions in response to service

•

requests may not work depending on the software

manufacturer.

You can launch an app in the Start screen.

Summary of Contents for DP300A2A-A01US































































































































Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands

Samsung DP300A2A-A01US, User Manual

Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands