Samsung DP300A2A-A01US User Manual Download Page 23

Page: 23 / 126

Chapter 1

Getting Started

Overview

Touch buttons (for corresponding models only)

Some touch buttons may not be provided depending on the

model specifications.

If you touch the sensor, the touch button works.

Menu

Shows or hides the screen settings OSD.

Screen

Settings

The menu of the mode selected by
the user pressing the

button is

supported.
The <MagicBright>, <MagicAngle>,

<MagicEco> and <Screen Size> menus

are supported.

<MagicBright>

: You can choose the

optimal screen settings for a movie or

game.
The <Custom>, <Standard Screen>,

<Game>, <Movie> and <Video Contrast

Setting> screen modes are supported.

<MagicAngle>

: You can choose the

optimal screen settings for your viewing

angle.
If you configure this setting when you

watch the screen from above, below or

the side of the screen, you can view the

screen as if you were directly in front.

<MagicEco>

: This mode provides power-

saving mode by decreasing the current

to the display panel.

<Screen Size>

: This mode provides

various screen size options.

The terms in this manual may differ

from the actual terms displayed on

the screen.

Summary of Contents for DP300A2A-A01US































































































































Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands

Samsung DP300A2A-A01US, User Manual

Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands