Samsung DP300A2A-A01US User Manual Download Page 4

Page: 4 / 126

Chapter 1

Getting Started

Before You Start

Before reading the User Guide, first check the following

information.

Optional items, some devices and software referred to in

•

the User Guide may not be provided and/or changed by

upgrade.

Note that the computer environment referred in the User

Guide may not be the same as your own environment.
The pictures used for the cover and the main body in the

•

User Manual are those of the representative model of each

series and may differ from the actual appearance of the

product.
This guide decribes procedures for using both the mouse

•

and the touchpad.
This manual has been written for the Windows 8 operating

•

system. The descriptions and figures may differ depending

on the installed operating system.
The User guide supplied with this computer may vary

•

depending on your model.

Using the software

From the

•

Start Screen

, right-click any area and select

All

apps

in the bottom right corner.

Then, click a desired program.

Or you can simply launch

Quick Starter

to do the same.

You can install

•

Quick Starter

from

SW Update

Summary of Contents for DP300A2A-A01US































































































































Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands

Samsung DP300A2A-A01US, User Manual

Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands