Samsung DP300A2A-A01US User Manual Download Page 56

Page: 56 / 126

Chapter 3.

Using the computer

Adjusting the Volume

You can adjust the volume using the keyboard and the volume

control program.

Adjusting the Volume using the Keyboard

Press the

touch button

once and then adjust the

sound by pressing

Adjusting the Volume using the Volume

Adjustment Program

Click the

Charms menu > Settings

áᔪ

Ŗᮁ

᜽᯲

ᰆ⊹

ᖅᱶ

⦽

to adjust the control

bar.

Mute

Using SoundAlive (Optional)

The SoundAlive function enables you to experience more

stereophonic sound using stereo speakers.

SoundAlive is only supported in Windows 8.

•

The software programs provider may vary, depending on

•

your computer model.
In addition, some pictures may differ from actual product

•

depending on the computer model and software version.

Right-click over the

Volume

in the taskbar on the Desktop

and click

Play Device

(Alternatively, click the

Charms menu

on the

Desktop >

Settings

áᔪ

Ŗᮁ

᜽᯲

ᰆ⊹

ᖅᱶ

> Control Panel > Hardware and Sound >

Sound

Right-click over the

Speakers

and select

Properties

Select the

SoundAlive

tab and select one of the modes.

Summary of Contents for DP300A2A-A01US































































































































Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands

Samsung DP300A2A-A01US, User Manual

Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands