Samsung DP300A2A-A01US User Manual Download Page 85

Page: 85 / 126

Chapter 4.

Settings and Upgrade

Changing the Boot Priority

You can change the boot priority in the BIOS Setup.

Select the

Boot

menu in the BIOS Setup.

Press <

Enter

> on the

Set Boot Order

item.

BIOS Setup

Main

Advanced Security

Boot

Exit

Select boot priority of
boot devices.

Fast Boot
Booting By LAN
Secure Boot

Set Boot Order

[Disabled]
[Disabled]
[Enabled]

ሪ

Press <

Enter

> on the

Boot Option #1

item.

Select the drive to boot from.

BIOS Setup

Boot

Boot Option #1 [Windows Boot Manager]
Boot Option #2 [XXXX-XXXX-XXXX]

Keys used to view on
configure devices:



and



arrows select

device.
<F6>, <F5> move the
device up or down.

Boot Option #1

Windows Boot Manager
XXXX-XXXX-XXX
Disabled

Press the

F10

key to save and exit the BIOS Setup.

The boot priority will be changed.

Summary of Contents for DP300A2A-A01US































































































































Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands

Samsung DP300A2A-A01US, User Manual

Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands