Samsung DP300A2A-A01US User Manual Download Page 64

Page: 64 / 126

Chapter 3.

Using the computer

Using the TV

(Optional)

Resetting the channels

Select

Home > Settings > Chanel

. Then select

Scan

Channels > Scan

. The scanned channels are saved.

If you cannot scan channels easily, select the

Reset TV Signal

option in the Channel menu to reset the channels.

Note on Configuration

The setup procedures may differ depending on the current

•

type of your TV service.
You should set the product to the region and postal code

•

where your computer is currently installed.
If the TV signal provider setup screen appears, select the

•

correct provider. If the configured provider is not correct, not

all of the channels will be received or the TV picture quality

may be degraded.

Summary of Contents for DP300A2A-A01US































































































































Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands

Samsung DP300A2A-A01US, User Manual

Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands