Samsung DP300A2A-A01US User Manual Download Page 41

Page: 41 / 126

Chapter 3.

Using the computer

The appearance and color of the keyboard may differ depending on the model.

Using a wired keyboard and mouse

(Optional)

Windows keys

Show the Windows

start menu.

Application key

Performs the right-

clicking function of the

mouse.

Directional keys

Moves the cursor up,

down, left or right.

Numeric keys

If the Num Lock key is pressed, the

Num Lock lamp is turned on and the

numeric keys are enabled.

Utility keys

Move the cursor to the previous

or next page or to the beginning

or end of a line to enable deleting,

inserting and modifying the letters.

Lamps

Indicates that the Num Lock,

Caps Lock or Scroll Lock keys

are set or not.

Function keys

Execute various program functions. The

roles of the buttons differ depending

on the application that is running.

Power key

This button is used to turn

the computer on and off.

Volume keys

These buttons are used to

turn the sound on or off

and control the volume.

Summary of Contents for DP300A2A-A01US































































































































Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands

Samsung DP300A2A-A01US, User Manual

Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands