Samsung DP300A2A-A01US User Manual Download Page 57

Page: 57 / 126

Chapter 3.

Using the computer

LCD Brightness Control

Adjusting the LCD brightness control using the

touch button (for corresponding models only)

Press the

touch button

and select the

Picture

menu to

configure the settings.

Samsung Computer’s Defective LCD pixel management

standard

Although Samsung Electronics, Co., Ltd. observes strict

quality and confidence specifications for LCD manufacturing,

the company must inevitably allow a few defective cells in

panels due to a technological limitation of the manufacturing

process.
Therefore Samsung observes and manages the following dot

principles:
- Bright dot : 2 or less

- Black dot : 4 or less

- Combination of Bright and Dark : 4 or less

Instructions for Cleaning the LCD

Clean the LCD panel with a soft cloth lightly moistened with

computer cleansing detergent moving in one direction.
Cleaning the LCD panel with excessive force can damage the

LCD.

Summary of Contents for DP300A2A-A01US































































































































Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands

Samsung DP300A2A-A01US, User Manual

Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands