Samsung DP300A2A-A01US User Manual Download Page 79

Page: 79 / 126

Chapter 4.

Settings and Upgrade

BIOS Setup

The BIOS Setup enables you to configure your computer hardware

according to your needs.

Use the BIOS setup to define a boot password, change the

•

booting priority, or add a new device.
Since incorrect settings may cause your system to

•

malfunction or crash, take care when configuring the BIOS.
The functions of the BIOS setup are subject to change for

•

product function enhancement purposes.
The BIOS Setup menus and items may differ depending on

•

your computer model.

Entering the BIOS Setup

Turn the computer on.

Immediately press the

key several times.

After a moment, the BIOS setup screen appears.

The items in the BIOS setup may differ depending on the

product.

Summary of Contents for DP300A2A-A01US































































































































Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands

Samsung DP300A2A-A01US, User Manual

Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands