Samsung DP300A2A-A01US User Manual Download Page 95

Page: 95 / 126

Chapter 5.

Troubleshooting

Reinstalling Windows

(Optional)

The following window appears, select an installation option.

If you click

Custom

, the procedures from Step 5 continue

sequentially.

If you click

Upgrade

, the procedures from Step 6 continue

sequentially.

For Windows 7/8, this screen may not appear depending

•

on the version.

Custom

•

Select this option to

Reinstall Windows

. You have to

reinstall all necessary device drivers and programs after

the Custom installation. In addition, unnecessary folders

and files may remain on the hard disk drives after the

installation (e.g. C:\ Windows.old, etc.).

Upgrade

•

Select this option to

Upgrade Windows

while maintaining

current files, configurations and programs. Although you

therefore do not need to reinstall the device drivers and

programs, some programs may not work properly after the

upgrade.

When a window appears asking for the location to install the

operating system to, select a disk drive partition and click the

Next

button.

Drive D includes an area to save the backup image used by

Samsung Recovery Solution. Installing Windows to drive C is

recommended.

When previous Windows installation files are in the selected

partition, a message appears informing you that the files and

folders will be moved to the Windows. old folder. Click the

button.

The Windows installation continues.

The computer will restart 3 times during the installation.

If the

Press any key to boot from CD or DVD...

message

appears after a restart, do not press any button.

screen.

When the registration is complete, the Windows Desktop

screen appears.

For a smooth computer operation, installing the necessary

software installation is recommended.

Summary of Contents for DP300A2A-A01US































































































































Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands

Samsung DP300A2A-A01US, User Manual

Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands