Samsung DP300A2A-A01US User Manual Download Page 26

Page: 26 / 126

Chapter 1

Getting Started

Overview

Left View

Multi Card Slot

A card slot supports multi cards.

USB Port

Chargeable USB

Port

(Optional)

This port is used as a USB port or

chargeable USB port.
Using a chargeable USB port, you can

access or charge a USB device.

You can tell the ports apart using the

figures printed on the ports or by the

colors.

USB port: black

Chargeable USB Port: black

USB 3.0 port: blue

Chargeable USB 3.0 port: blue

Microphone Jack

A jack used to connect the microphone.

Headphone Jack

A jack used to connect the headphones.

What is a chargeable USB port?

USB device accessing and charging functions are supported.

•

The USB charging function is supported regardless of whether

•

the power is turned on or off.
Charging a device through a chargeable USB port may take

•

longer than general charging.
Using the Chargeable USB function when the computer is

•

running on battery power reduces the battery usage time.

The user cannot evaluate the charging status of the USB device

•

from the computer.
This may not be supported for some USB devices.

•

You can turn the Chargeable USB function

•

ON/OFF

by selecting

the

Settings > Power Management > USB Charging

option.

(Optional)

Summary of Contents for DP300A2A-A01US































































































































Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands

Samsung DP300A2A-A01US, User Manual

Search results

Summary of Contents for DP300A2A-A01US

Reviews:

Related manuals for DP300A2A-A01US

Brands by name

Popular brands