Wireless network setup (CLX-3185FW/CLX-3185WK only)
_ 9
5.
Enter the machine’s new information into the configuration window as
follows. In a corporate intranet, you may need to have this
information assigned by a network manager before proceeding.
•
MAC Address
: Find the machine’s MAC address from the
Network
Configuration Report
and enter it without the colons. For
example, 00:15:99:29:51:A8 becomes 0015992951A8.
•
IP Address
: Enter a new IP address for your printer.
For example, if your computer’s IP address is 192.168.1.150,
enter 192.168.1.X. (X is number between 1 and 254 other than
the computer’s address.)
•
Subnet Mask
: Enter a Subnet Mask.
•
Default Gateway
: Enter a Default Gateway.
6.
Click
Apply
, and then click
OK
. The machine will automatically print
the
Network Configuration Report
. Confirm that all the settings are
correct.
7.
Click
Exit
to close the SetIP program.
8.
If necessary, restart the computer’s firewall.
IP setting using SetIP Program (Macintosh)
For using SetIP program, disable the computer firewall before continuing
by performing the following:
The path and UIs may differ by Macintosh OS version. Refer to the
Macintosh OS manual.
1.
Open
System Preferences
.
2.
Click
Security
.
3.
Click the
Firewall
menu.
4.
Turn firewall off.
The following instructions may vary for your model.
1.
Connect your machine to the network with a network cable.
2.
Insert the Installation CD-ROM, and open the disk window, select
MAC_Installer
>
MAC_Printer
>
SetIP
>
SetIPApplet.html
.
3.
Double-click the file and
Safari
will automatically open, then select
Trust
. The browser will open the
SetIPApplet.html
page that shows
the printer’s name and IP address information.
4.
Click on the icon (third from left) in the SetIP window to open the
TCP/IP configuration window.
5.
Enter the machine’s new information into the configuration window as
follows. In a corporate intranet, you may need to have this
information assigned by a network manager before proceeding.
•
MAC Address
: Find the machine’s MAC address from the
Network
Configuration Report
and enter it without the colons. For
example, 00:15:99:29:51:A8 becomes 0015992951A8.
•
IP Address
: Enter a new IP address for your printer.
For example, if your computer’s IP address is 192.168.1.150,
enter 192.168.1.X. (X is number between 1 and 254 other than
the computer’s address.)
•
Subnet Mask
: Enter a Subnet Mask.
•
Default Gateway
: Enter a Default Gateway.
6.
Select
Apply
, then
OK
, and
OK
again. The printer will automatically
print the configuration report. Confirm that all the settings are correct.
Quit Safari
. You may close and eject the installation CD-ROM. If
necessary, restart the computer’s firewall. You have successfully
changed the IP address, subnet mask, and gateway.
Configuring the machine’s wireless network
Before starting, you will need to know the network name(SSID) of your
wireless network and the network key if it is encrypted. This information was
set when the wireless router(access point) was installed. If you do not know
about your wireless environment, please ask the person who has set up
your network.
To configure wireless parameters, you can use
SyncThru™ Web Service
.
Using SyncThru™ Web Service
Before starting the wireless parameter configuration, make sure cable
connection status.
1.
Check whether the network cable is connected to the machine. If not,
connect the machine with a standard network cable.
2.
Start a web browser such as Internet Explorer, Safari or Firefox and
enter your machine’s new IP address in the browser window.
For example:
3.
Click
Go
to access the SyncThru™ Web Service.
4.
Click
Login
on the upper left of the website.
A
Login
page appears.
5.
Type in the
ID
and
Password
then click
Login
.
If it’s your first time logging into SyncThru™ Web Service, type in the
below default ID and password.
•
ID: admin
•
Password: sec00000
6.
When the
SyncThru™ Web Service
window opens, click
Settings
>
Network Settings
.
7.
Click
Wireless
>
Wizard
.
Wizard
will help you setup the wireless network configuration.
However, if you want to set the wireless network directly, select
Custom
.
8.
Select the one
Network Name(SSID)
in the list.
•
SSID
: SSID (Service Set Identifier) is a name that identifies a
wireless network. Access points and wireless devices attempting
to connect to a specific wireless network must use the same
SSID. The SSID is case-sensitive.
•
Operation Mode
:
Operation Mode
refers to the type of wireless
connections (See "Wireless network name and Network Key" on
page 1).
-
Ad-hoc
: Allows wireless devices to communicate directly with
each other in a peer-to-peer environment.
-
Infrastructure
: Allows wireless devices to communicate with
each other through an access point.
