16
EB 5573 EN
Operation
2.7
Setting the party mode
Using the
Party mode
function, the controller continues or activates the rated operation of the
controller during the time when the party timer is active, regardless of the programmed
times-of-use. After the party timer has counted down, the party time function is reset to
00:00
Parameters
WE
Value range
Continue/activate rated
operation
0 h
0 to 48 h
Proceed as follows:
1.
Turn the rotary switch to (party mode).
blinks.
In the systems Anl 1.0, 1.9 and 3.5, 00:00 or the remaining time of the party time are
displayed. The following steps 2 and 3 (to select the control circuit) are not required.
2.
Select the control circuit in which day mode is to be activated or continued [
q
]:
1:
Heating circuit 1
2:
Heating circuit 2
3:
DHW circuit
Only those control circuits are available for selection which can be controlled by the se-
lected system.
3. Confirm the selected control circuit [
Û
].
Reading:
00:00
or the remaining time of the party time
4.
Extend day mode as required [
q
].
The time is set in steps of 15 minutes.
5. Turn the rotary switch back to normal switch position (information level).
The party timer runs down in steps of 15 minutes.
Note
Summary of Contents for TROVIS 5573
Page 144: ...144 EB 5573 EN Key number 1732...