12
EB 5573 EN
Operation
2.4 Activate the information level
In the normal switch position (information level), the time, date, public holidays and vaca-
tion periods as well as the temperatures of connected sensors and their set points can be dis-
played.
The data can also be read in the operating level
(manual mode). In this case, select and
confirm
InFo
on the display and proceed as described below.
Proceed as follows:
1.
Select value [
q
].
Depending on how the controller is configured, the current values of the following data
points appear one after the other on the display:
__:__
Time
Room temperature of heating circuit 1, 2
Outdoor temperature
Temperature at flow sensor VF, heating circuit 1, 2
Temperature at flow sensor VF1, primary heat exchanger circuit
Temperature at flow sensor VF2, VF4, DHW circuit
Temperature at solar collector sensor VF3
Temperature at return flow sensor RüF
Temperature at storage tank sensor SF1
Temperature at storage tank sensor SF2
Temperature at storage tank sensor of solar circuit
2.
Confirm a data point [
Û
] to read the associated set point/limit. The date is displayed
when the time reading appears.
Note
Summary of Contents for TROVIS 5573
Page 144: ...144 EB 5573 EN Key number 1732...
