Samson Media 7 5007-1, Mounting And Operating Instructions

Page: 73 / 124

EB 9510 EN 8-5
Operation
− The default density calculation is performed manually by the [Calculate densities | 2.2.x.x]
parameter based on the parameters listed in Fig. 8-3. Additionally, the density calculation
is determined by the process medium ([Medium for density correction | 2.2.2.x] and [Am
-
bient temperature | 2.2.x.x].
−
The density calculation can be changed from manual to automatic in the TROVIS-VIEW
software. The automatic density calculation provides a reference value with an accuracy of
±10 %.
8.3 Remote data transmission
The remote data transmission can only be used when a GSM module is installed.
To use remote data transmission, SAMSON creates a user account for each customer in the
SAM TANK MANAGEMENT web interface. All devices are added to the account by
SAMSON.
Î
Contact SAMSON's After-sales Service for details on how to register in SAM TANK
MANAGEMENT.
8.3.1 Status LEDs of the GSM module
The table below describes the meaning of the LEDs:
LED Color Illuminated Blinks
ERR Red Error or failure 2x: GSM module without SIM card
3x: incorrect PIN
FTP Green Fast blinking: data transmission in progress
GSM Green Searching for a network 1x: GSM connection OK
2x: server connection OK
3x: PIN code failed
4x: hardware error
Fast blinking: incoming SMS text message
SYS Green 1x: system ON
Note
Note