Samson Media 7 5007-1, Mounting And Operating Instructions

Page: 103 / 124

EB 9510 EN 16-1
Annex A (configuration instructions)
16 Annex A (configuration instructions)
The menu structure and parameters for on-site operation are described below. Further
settings can also be made in the TROVIS-VIEW software. These settings are described in the
Operating Instructions 'Media 7 Differential Pressure Meter – Configuration with TROVIS-
VIEW'
u
EB 9510-2.
The availability of executed menu items and parameters depends on the version and configu -
ration of the differential pressure meter as well as the option modules used. Default settings
are marked 'default'.
Menu Adjustment range/values/description
Start-up 1
Switch off 1.1 Switch off the differential pressure meter
This parameter is only available after the differential pressure
meter has been disconnected from the input voltage and the
device is still powered by the internal uninterruptible power
supply.
User level 1.2 Select user level
▪ Maintenance staff: restricted access
▪ Specialist: full access
(password protection possible in menu item 1.12)
Sprache/Language 1.3 Select the menu and display language:
▪ German/English (default)/French/Italian/Russian/Spanish/
Turkish
Operating mode 1.4 Select the operating mode:
▪ Differential pressure (default): differential pressure
measurement with linear characteristic
▪ Filling level: the device issues an mA signal (4 to 20 mA)
which is proportional to the tank content.
Start-up wizard 1.5 Run the wizard.
Zero point of differential
pressure
1.6 Set zero (resetting zero is possible)
Differential pressure span 1.7 Set span (resetting span is possible)
Zero point of pressure
sensor
1.8 Set zero (resetting zero is possible)
Note