Samson Media 7 5007-1, Mounting And Operating Instructions

Page: 13 / 124

EB 9510 EN 1-7
Safety instructions and measures
1.3 Notes on possible property damage
NOTICE
!
Risk of dp cell damage due to unsuitable medium properties.
The device is designed for process media with defined properties.
Î
Only use process media suitable for the device version according to the article code
(see the 'Markings on the device' section).
Risk of damage to the electronics due to the incorrect connection of the electrical
power supply.
The differential pressure meter is designed to operate under exactly defined electrical
conditions.
Î
Observe the permissible tolerances of the supply voltage.
Î
For wiring, you are required to observe the relevant regulations concerning device
safety and electromagnetic compatibility.
Risk of damage to the device due to incorrect mounting position.
Î
Mount the device in the upright position only.
Risk of damage to components for optional additional functions due to incorrect
handling during installation.
To tailor the differential pressure meter to a particular task, it can be fitted with option
modules, a GSM module and a standby power supply. Special care needs to be taken
when inserting and removing these components.
Î
Before inserting or removing the components for optional additional functions,
disconnect the power supply.
Î
Observe the ESD requirements according to IEC 61340-5-1.
Risk of damage to the dp cell due to incorrect use of oxygen.
When liquid oxygen is used as the process medium, the permissible temperature range
is exceeded.
Î
When the device is used for oxygen service, only allow the dp cell and any
SAMSON accessories (e.g. valve block) to come into contact with gaseous oxygen .
Î
Do not allow the oxygen pressure to exceed the maximum permissible limit of
50 bar.