Samson Media 7 5007-1, Mounting And Operating Instructions

Page: 59 / 124

EB 9510 EN 7-3
Start-up and configuration
2. Select the required character with or key. Press key to confirm the selected
character.
3. Proceed in the same way to enter the other characters of the medium identifier.
4. Press key.
5. Select OK with or
key and confirm with key.
6. Press key again to continue.
Step 6 of 6: complete start-up wizard
Î
Press key (Done) to close the wizard.
The display returns to the start screen.
− Select ESC to exit the wizard at any time.
− Select forward (>) and back (<) to navigate between steps 1 and 6.
−
The wizard can be started at any time in the [Start-up | 1] menu by selecting menu item
1.5 ('Specialist' user level only).
7.1.1 Option module wizard
If option modules are installed, the option module wizard automatically starts during first
start-up after completion or exiting the start-up wizard.
After the option module wizard starts, the slots for option modules are shown.
1. Press or key to select the required slot or option module.
2. Press
key to confirm the setting.
Depending on the selected option module, diverse settings, such as name, signal
source, limit etc., can be made. Descriptions to the parameters can be found in the pa-
rameter list in Annex A for the corresponding option modules from menu item 2.4 on -
wards.
− Select ESC to exit the option module wizard at any time.
− Select forward (>) and back (<) to navigate between steps.
Note
Note