Samson Media 7 5007-1, Mounting And Operating Instructions

Page: 107 / 124

EB 9510 EN 16-5
Annex A (configuration instructions)
Menu Adjustment range/values/description
Length/height of
measuring line
2.2.1.x Reading of the set length/height of measuring line
Location of low-pressure
pipe
2.2.1.x Reading of the set location of low-pressure pipe
Volume at 20 mA 2.2.1.x Reading of the volume at 20 mA (MCN/SCN)
Permissible filling limit 2.2.1.x Reading of the set permissible filling limit
Further parameters exist in TROVIS-VIEW (see
u
EB 9510-2)
Medium 2.2.2
Memory space 2.2.2.1 Select one of ten available memory spaces. The memory
spaces 1 to 7 are ready configured with records for the
following media:
▪ Ar/O
2
/N
2
/CO
2
/CH
4
/C
2
H
4
/LNG.
The memory spaces 8 to 10 are marked with 'User' and can
be edited as required. The parameters of all 10 memory
spaces can be changed.
Medium identifier 2.2.2.x Enter text (max. 11 characters) to identify the medium. If the
medium identifier is changed, the name of the previously
selected memory space is also changed with it.
▪ Enter characters as required
Unit 2.2.2.x Unit for calculating the tank content [MCN], [SCN] and [UCW]
and the filling level
▪ Selectable units: % · kg · Nm³ · L · ft³ · lbs
Operating filling limit 2.2.2.x Enter operating filling limit (UCW) in %
▪ 0.0 to 95.0 % (default: 90.0 %)
Shrink factor 2.2.2.x Enter tank's shrink factor. This value depends on the tank
material, operating temperature, and the process medium.
▪ 0.95 to 1.00 (default)
Density calculation 2.2.2.x Select whether the density is to be calculated automatically or
manually. If 'Automatic' is selected, the density is calculated
based on default data records. If 'Manual' is selected, the
values for liquid and gas density can be changed.
'Automatic' can only be selected after a ready-configured
medium is selected in the [Memory space| 2.2.2.1] parameter.
▪ Manual
▪ Automatic