Samson Media 7 5007-1, Mounting And Operating Instructions

Page: 116 / 124

16-14 EB 9510 EN
Annex A (configuration instructions)
Menu Adjustment range/values/description
Differential pressure
[Δp0]
3.14 Reading of the minimum differential pressure (filling level
mode)
Differential pressure
[Δp100]
3.15 Reading of the maximum differential pressure (filling level mode)
Temperature inside device 3.16 Current temperature reading in °C
Heating 3.17 Reading ON/OFF
Battery voltage 3.19 Battery voltage reading in V
Tank identifier 3.25 Reading of the identifier of the currently selected tank
Ambient temperature 3.29 Ambient temperature reading in °C
Liquid density 3.30 Liquid density reading in kg/m³
Gas density in tank 3.31 Reading of the gas density in tank in kg/m³
Gas density in low-
pressure pipe
3.32 Reading of the gas density in the low-pressure pipe in kg/m³
Diagnostics 4
Status messages 4.1 Status messages provide an overview on the current states of
individual functions or components of the Media 7 device. A
corresponding status icon is assigned to failures and error
messages:
Failure (error class E1)
Out of specification (error class E2)
Maintenance required (error class E3)
No message
Possible status
Media condensed state 4.1.1 • • • •
Condensed state (E1) 4.1.2 • •
101: AMR magnet 4.1.3 • •
102: AMR sensor 4.1.4 • •
103: Memory
(calibration)
4.1.5
• •
104: Memory (data) 4.1.6 • •
105: Factory calibration 4.1.7 • •
106: Pressure sensor 4.1.8 • •