Doc.-ID: 150903-PT08BA-TG-ExCam IPM1145-(L)_en_rev.02.docx, page 9 of 40
At a cable connection length of
≥
3 m
:
(without integrated pressure barrier
/ with
elastomer sealing on the outer sheath) e.g.:
„ADE 4F MsNi Type5 - M20x1.5 (
CAPRI
)“,
with additional strain relief;
At a connection cable length of
< 3m
:
(
with integrated pressure barrier
/ epoxide
compound grouting of the single conductors
and duroplast/elastomer sealing of the outer
sheath) e.g.:
„8163/2 PXSS2K - M20x1.5 (
R.
Stahl GmbH
)“
Outer diameter:
9.0 ± 0.2mm
Wall thickness:
0.9 ± 0.1mm
Bending radius:
10 x outer diameter at installation
5 x outer diameter after installation
Tensile:
Max. 140N
Temperature range:
-10° C to +50° C (at point of installation)
-60° C to +80° C (fixed installed)
Conductor design:
4 x 2 x AWG22/1 blank, CAT.6a
Isolation:
SFS-PE foamed
Core diameter:
1.52 ± 0.02 mm
Color code:
IEC 708-1
Pair shielding:
Compound aluminum foil
Shielding:
Copper braid, multiple wires 0-10 vz, opt. cov-
erage approx. 85%
Outer sheath:
PUR FHF
Characteristics:
PUR halogen free, flame resistant (EN 60332-
1-2), UV and ozone resistant, high chemical re-
sistance, EMV shielded
(q.v. www.samcon.eu, data sheet SKD02-T)
User interface:
P
(Plug) version: RJ-45 Stecker (EIA/TIA-
568B), e.g. Weidmüller IE-PS-RJ45-FH-BK,
Phoenix Contact VS-08-RJ45-5-Q/IP20 etc.,
10BASE-T/100BASE-TX PoE
K
(terminal block) version: about 12 cm stripped:
8 x single conductors twisted pair (solid conduc-
tor A=0.33mm
2
, ø=0.64 mm approx. 6 mm
stripped), 1 x shield (Cu braid tinned 1.5 mm
2
,
ferule color code according to DIN 46228)
10BASE-T/ 100BASE-TX PoE
