Doc.-ID: 150903-PT08BA-TG-ExCam IPM1145-(L)_en_rev.02.docx, page 35 of 40
6
Network access and visualization
The following steps describe the most important steps for the initial commissioning of the
camera. The configuration menu of the web surface allows an intuitive navigation and
offers several configuration possibilities. For a comprehensive user manual of the web
surface, please refer to the to the Axis user manual which can be found on the provided
USB stick or which can be accessed at:
ExCam IPM1145
http://www.axis.com/us/en/products/axis-m1145/support-and-documentation
ExCam IPM1145-L
http://www.axis.com/us/en/products/axis-m1145-l/support-and-documentation
Network access of the ExCam IPM1145-(L) is supported by most operating systems and
browsers. The recommended browsers are Internet Explorer with MS Windows, Safari
with Macintosh and Firefox with Windows and additional operating systems.
To carry out „video streaming“ via the Microsoft Internet Explorer, installing the “AXIS
Media Control” (AMC) is required. The installation request is executed during the initial
commissioning. In order to visualize the „H.264“ video streams, QuickTime
TM
is recom-
mended. For „Motion JPEG“ coded video streams, Java Applet is suggested which re-
quires JVM (J2SE) 1.5 or higher, or JRE (J2SE) 5.0 or higher.
At delivery, the ExCam IPM1145-(L) is set to the applicable net frequency (50Hz or
60Hz). If the camera is used at a location with a differing net frequency, a flickering of the
picture might be noticeable, particularly in surroundings with fluorescent tubes. In such a
case, the applicable settings have to be carried out within the menu “System Options >
Advanced > Plain Config” (requires a system reboot).
6.1
Browser Support
A list with the currently supported web browsers, operating systems, and required add-
ons can be viewed at:
http://www.axis.com/techsup/cam_servers/tech_notes/browsers.htm
