Doc.-ID: 150903-PT08BA-TG-ExCam IPM1145-(L)_en_rev.02.docx, page 26 of 40
Status LED
Operation mode
Color
Comment
Green
At normal operation, a constant green light shows
Note: It is possible to configure the status LED in such a manner that in
normal operation it is not illuminated or only blinks when the camera is
accessed
Yellow
It is illuminated permanently when the camera is turned on as well as
when the camera is set back to default settings
Red
In case of an activation failure the light blinks slowly
Usage of the focus
assistant
n.a.
Table 5.5
– Status and control LED
5.4
Step 3: Adjusting the lens
Parametrization measures at the lens of the ExCam IPM1145-(L) are exclusively done
via the Web Interface or the visualization software. Mechanical adjustments at the varifo-
cal lens by the user are not possible. The camera models ExCam IPM1145 and ExCam
IPM1145-L dispose of a so called
„remote Zoom“ functionality (q.v. figure 5.8)
The remote zoom function is less capable than a motor zoom lens (slower response time,
lower range) but more compact. It allows the user making the final settings via the com-
puter in order to conveniently set the best focus and resolution. Due to the remote focus
function, the manual focus adjustment becomes obsolete and the settings can be done
via the computer also.
Concerning the configuration and the additional camera settings please refer to chapter
2.6.1 and 2.6.2
Figure 5.8
– Remote Zoom control of the ExCam IPM1145-L
