manualshive.com logo in svg

Sam4s ER-900 Series, Operator'S And Programming Manual

The Sam4s ER-900 Series is a cutting-edge point of sale system that elevates your business operations. Access detailed instructions and technical guidance in the free user manual available for download at manualshive.com. Empower yourself with this comprehensive manual to optimize your experience with this outstanding product.

Share
Download
background image

 

SAM4s ER-900 Series Operator's & Programming Manual v.1.3 

Glossary  •  239 

Stock (PLU Stock) 

Each PLU reports an activity counter.  Normally the activity counter increments (adds) and is 
reset when a PLU Z-report is taken.  You can choose to use the PLU activity counter as a 
stock counter.  If used as a stock counter, each PLU activity will reduce the count.  A separate 
program allows you to add to the stock count or enter a new stock count.  Stock counts are 
not reset when PLU Z-reports are taken.   

Surcharge (Item) 

An item percent surcharge adds a percentage to the price of an item.  This addition nets the 
PLU total.  

Surcharge (Sale)  

A sale percent surcharge adds a percentage to the entire sale. 

Tare 

Tares are container weights.  If you are using the scale function, you can preset up to 5 
different tare weights.  The tare can be subtracted automatically when a specific PLU is 
registered, or manually inputting the tare number and pressing the TARE key can subtract the 
tare.  Tare #5 can be programmed for entering tare weights manually. 

Tax Computation by Rate/Tax Computation by Table 

In the simplest method of tax calculation, the register is set with a tax rate (or rates) and the 
taxes are computed by a percentage calculation.  In some cases, a tax that is entered as a 
percentage does not follow exactly the tax charts that apply in your area (even if the tax chart 
is based on a percentage).  In these cases, we recommend that you enter your tax using tax 
table programming.  This method will match tax collection exactly to the break points of your 
tax table. 

Tax Exempt 

Tax exempt is used to exclude the tax from an entire sale. 

Tax Shift 

Tax shift keys are used to reverse the tax status of a PLU entry. 

Tender 

A tender is the register operation in which the amount of the payment is entered.  If the tender 
exceeds the amount due, the sale is finalized and change due is displayed.  

Training Operation 

Training operations do not add to PLU or function key totals.  This allows an operator to 
practice making entries without updating sales totals.  If you wish to perform training 
operations, designate one of the clerks for training.  You must clear (Z) the register before the 
training clerk can be used.  When that clerk is signed on, the register is in “training mode”. 

Transaction Number  

See consecutive number.   

Summary of Contents for ER-900 Series


















































































































































































































































Reviews:

No comments

Related manuals for ER-900 Series

Tektronix 7D14 Instruction Manual preview
7D14
Brand: Tektronix Pages: 133
Casio TK-810 Operator'S Instruction Manual preview
TK-810
Brand: Casio Pages: 4
Casio TK-7000 Operation Manual preview
TK-7000
Brand: Casio Pages: 19
Casio TE8000 Operating Instructions Manual preview
TE8000
Brand: Casio Pages: 19
Banner TCER Setup Manual preview
TCER
Brand: Banner Pages: 12
SenSource PC-RBA02 Quick Start Manual preview
PC-RBA02
Brand: SenSource Pages: 4
FAWAG S.A. lite Online Quick Start Manual preview
lite Online
Brand: FAWAG S.A. Pages: 2
ECR 650F Operating Instructions Manual preview
650F
Brand: ECR Pages: 37
Nautilus Hyosung MONiMAX7600DA Operator'S Manual preview
MONiMAX7600DA
Brand: Nautilus Hyosung Pages: 102
QUORION CR 502 Operating And Programming Manual preview
CR 502
Brand: QUORION Pages: 4
NCR 5887 Operator'S Manual preview
5887
Brand: NCR Pages: 278
Panasonic JS-170FR Series Service Manual preview
JS-170FR Series
Brand: Panasonic Pages: 161
Sharp ER-A457 Service Manual preview
ER-A457
Brand: Sharp Pages: 7
Pocket Pit LAP COUNTER Manual preview
LAP COUNTER
Brand: Pocket Pit Pages: 2
EnOcean EASYFIT EPAC Installation Manual preview
EASYFIT EPAC
Brand: EnOcean Pages: 4

Brands by name

Popular brands

Load more brands