manualshive.com logo in svg

Sam4s ER-900 Series, Operator'S And Programming Manual

The Sam4s ER-900 Series is a cutting-edge point of sale system that elevates your business operations. Access detailed instructions and technical guidance in the free user manual available for download at manualshive.com. Empower yourself with this comprehensive manual to optimize your experience with this outstanding product.

Share
Download
background image

 

12  •  Introduction 

SAM4s ER-900 Operator's & Programming Manual (prelim) 

Using This Manual 

This manual provides you with a means to use your SAM4s cash register to its fullest 
potential.  It is divided into six sections: 

 

"Getting Started" on page 21, provides quick start steps to help you get up and 
running for basic applications. 

 

"Operations" on page 35, guides you through the basic operation sequences. 

 

"Management Functions" on page 87, explains manager controlled functions, along 
with reports and balancing information. 

 

"S-Mode Programming" on page 93 provides instructions for secure programming – 
usually done by the installing dealer prior to installation.  

 

“P-Mode Programming” on page 117 provides complete programming instructions, 
including PLU, function key programs, and system options.  This section is 
recommended for use by storeowners and managers.  Call your SAM4s dealer if you 
find you need programming assistance. 

 

“Sample Reports” on page 203 provides a sample of each register report.   

The SAM4s ER-900 allows many different user applications.  This manual was written with 
this in mind.  Although we have tried to touch on all available options, your specific 
application may differ. 

If you have questions concerning the configuration of your ER-900, contact your authorized 
SAM4s dealer. 

Using Flowcharts 

Flowcharts are used to supplement step-by-step instructions throughout this manual.  For 
example, the following flowchart describes how to register $1.00 into the PLU1 key: 

 

This flowchart means: 

1.

 

Press numeric key 1. 

2.

 

Press numeric key 0. 

3.

 

Press numeric key 0. 

4.

 

Press PLU #1. 

Follow the flowchart from left to right, pressing the keys in the order they are shown.  
Numeric keypad entries are shown as square keys.  PLU and function keys are shown as 
rectangular keys.   

1 

0 

0 

PLU #1 

Summary of Contents for ER-900 Series


















































































































































































































































Reviews:

No comments

Related manuals for ER-900 Series

National Cash Register Class 500 User Manual preview
Class 500
Brand: National Cash Register Pages: 22
Vega SI-12 User Manual preview
SI-12
Brand: Vega Pages: 32
Bleskomat ATM User Manual preview
ATM
Brand: Bleskomat Pages: 25
Autonics CTS Series Manual preview
CTS Series
Brand: Autonics Pages: 4
Japan Cach Machine G356E Service Manual preview
G356E
Brand: Japan Cach Machine Pages: 22
Uniwell SX-7005 User Manual preview
SX-7005
Brand: Uniwell Pages: 78
Uniwell NX-5400 Operation Manual preview
NX-5400
Brand: Uniwell Pages: 90
Nautilus Hyosung MX7600I Operator'S Manual preview
MX7600I
Brand: Nautilus Hyosung Pages: 101
TEC TEC MA-71 Owner'S Manual preview
TEC MA-71
Brand: TEC Pages: 55
TEC TEC FS-3700 R4 Series Owner'S Manual preview
TEC FS-3700 R4 Series
Brand: TEC Pages: 134
EC Line EC-CD-4617 User Manual preview
EC-CD-4617
Brand: EC Line Pages: 2
Olympia NC-350A Series User Manual preview
NC-350A Series
Brand: Olympia Pages: 16
Lindgren-Pitman LP-TIMER-3 Installation And Instruction Sheet preview
LP-TIMER-3
Brand: Lindgren-Pitman Pages: 2
Sunmi NC010 Manual preview
NC010
Brand: Sunmi Pages: 2
Omron SYSMAC CS Series Reference Manual preview
SYSMAC CS Series
Brand: Omron Pages: 1405
Foster EPro Installation And Operation Manual preview
EPro
Brand: Foster Pages: 12
Sterling Scale XC780 Operation Manual preview
XC780
Brand: Sterling Scale Pages: 54

Brands by name

Popular brands

Load more brands