manualshive.com logo in svg

Sam4s ER-900 Series, Operator'S And Programming Manual

Share
Download
Sam4s ER-900 Series Operator'S And Programming Manual Download Page 36

 

36  •  Operations 

SAM4s ER-900 Series Operator's & Programming Manual v.1.3 

Keyboard Legend Description 

CASH 

Use to finalize cash sales.  Calculates the sale total including tax 
and opens the cash drawer.  Change computation is allowed by 
entering an amount before pressing the 

CASH

 key.  The cash 

drawer will open only if the amount tendered is equal to or 
greater than the total amount of the sale.  Post tendering is also 
available should a second change calculation be necessary.  Re-
enter the tendered amount and press the 

CASH

 key to show the 

new change computation. 
Press the 

CASH

 key a second time to issue a buffered receipt 

when the receipt on/off function is OFF. 

CHECK  

Use to finalize check sales.  Calculates the sale total including 
tax, finalizes the sale, and opens the cash drawer.  Change 
computation is allowed by entering an amount before pressing 
the 

CHECK 

key.  The cash drawer will open only if the amount 

tendered is equal to or greater than the total amount of the sale.  
Change issued will be subtracted from the cash-in-drawer total. 

CHECK CASHING 

Use to exchange a check for cash.  Cash-in-drawer and check-in-
drawer totals are adjusted.   

CHECK ENDORSEMENT 

Use to print a check endorsement message on an optional slip 
printer after a check has been tendered.  See “Programming the 
Receipt/Check Endorsement Message” on page 189 to program 
an endorsement message.   

CHARGE (1-8)  

Use to finalize charge sales.  Calculates the sale total including 
tax, finalizes the sale, and opens the cash drawer.  Change 
computation is allowed by entering an amount before pressing 
the 

CHARGE

 key.  The cash drawer will open only if the 

amount tendered is equal to or greater than the total amount of 
the sale.  Change issued will be subtracted from the cash-in-
drawer total. 

CHECK # 

The 

CHECK #

 key is used to begin a new, or access an existing 

balance (hard check) or itemized bill (soft check).   
Check track numbers that are entered manually may be set at a 
fixed length of one to nine digits.  Check track numbers assigned 
automatically will begin with #1.    
Existing checks are accessed by entering the check track number 
and pressing the 

CHECK #

 key. 

CLEAR 

Use to clear entries made into the 10 key numeric pad or 

X/TIME

 key before they are printed.  Also used to clear error 

conditions. 

Summary of Contents for ER-900 Series


















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands