background image

 

180  •  P-Mode Programming 

SAM4s ER-900 Series Operator's & Programming Manual v.1.3 

Mix and Match Discount Programming 

Retailers often offer discounts when multiples of different items are purchased.  For example, 
the offer: “save $5 on any three bottles of wine” can be handled by a mix and match discount.  
The ER-900 can accommodate up to 99 different mix and match discounts.   

Tables have the following programming options that are set through separate programs: 

 

Program 600 – Trip Level Programming – This program sets the number of items 
that must be purchased to receive the discount 

 

Program 601 – Price Programming – This program sets the amount of the discount.   

 

Program 610 – Mix & Match Descriptor

 

– This program allows you to set a unique, 

up to 18-character, descriptor for each Mix & Match discount.   

You also must link eligible items to the appropriate table.  See “Program 450 – PLU Mix and 
Match Programming” on page 136 to identify the mix and match table for the eligible PLU.   

Summary of Contents for ER-900 Series


















































































































































































































































Reviews: