Via Pro User’s Guide – TouchChat
12
Charging the Device and Amplifier
Connecting the Charger
You received a battery charger with your Via Pro device. One end of the charger plugs into a wall
outlet—a surge protector is recommended. The other end has a USB-C connector, allowing you to
charge the device and amplifier at the same time.
Use only the battery charger provided with your device.
Cords and cables are potential entanglement or strangulation hazards. Please consider this prior to placing these items
with device users.
On a regular basis, visually inspect cables, cords, and connectors for damage or wear, especially where they are subject
to extra stress. Cables and cords can become frayed or damaged from heavy use or with age. For example, a frayed cable
could cause a battery charger/power adapter to short-circuit, posing a hazard to the user. If any cable, cord, or
connector is damaged or worn, call Service for a replacement.
Locate the device in a safe location while charging.
Batteries are not replaceable by the customer.
To charge the device and amplifier:
Hint:
We suggest charging the system each night.
1.
Tap the device’s power switch to turn the display light off.
2.
Plug the charger’s USB-C cable into the device charging port.
3.
Plug the other end of the charger into a wall outlet or surge protector.
4.
The amber light next to the charging port will flash during charging and remain on when the
amplifier is fully charged.
When the device and amplifier are fully charged:
1.
Unplug the charger from the device.
2.
Unplug the charger from the wall outlet or surge protector (
optional
).
3.
Tap the device’s power switch to turn the display light on.
Charging light (amber)
Device charging port
