31
7.5.5. Operate
Touch the icon
, (At the bottom of the screen), and
the system enters the page of the Operate, as it is shown in
Fig.48.
Fig. 48.
Operate menu
The Operate menu includes function button and test command.
The contents are described in details below.
FUNTION BUTTON
•
Clear/Restore Buzzing
Clear or Restore buzzing of the system by touching the icon
or
.
•
Fault Clear
Clear the faults by touching the icon
.
•
Transfer to \ESC Bypass
Transfer to or ESC bypass mode by touching the icon
or
.
•
Transfer to Inverter
Transfer the bypass mode to Inverter Mode by touching the
icon
.
•
Enable Module “OFF” Button
Enable the switch for powering off the Power Module by
touching the icon
.
•
Reset Battery History Data
Reset the battery history data by touching the icon
, the history data includes the times of dis-
charge, days for running and hours of discharging.
•
Reset Dust filter Using Time
Reset the time of dust filter using by touching the icon
, it includes the days of using and mainte-
nance period.
TEST COMMAND
•
Battery Test
By touching the icon
, the system transfer to
the Battery mode to test the condition of the battery. Ensure
the bypass is working normally and the capacity of the bat-
tery is no less than 25%.
•
Battery Maintenance
By touching the icon
, the system transfers to
the Battery mode. This function is used for maintaining the
battery, which requires the normality of the bypass and
minimum capacity of 25% for the battery.
•
Battery Boost
By touching the icon
, the system starts boost
charging.
•
Battery Float
By touching the icon
, the system starts
float charging.
•
Stop Test
By touching the icon
, the system stops bat-
tery test or battery maintenance.
7.5.6. Scope
Touch the icon
, (At the bottom right of the
screen), and the system enters the page of the Operate, as
it is shown in Fig.49.
ADAPT
UNINTERRUPTIBLE POWER SUPPLY
USER'S MANUAL