Sakai SW800-II, Shop Manual

Page: 171 / 258

9-015
INSPECTION AND ADJUSTMENT
8. ADJUSTMENT OF FORWARD-REVERSE LEVER LINKAGE
8-1. Adjustment
If the forward-reverse lever linkage was replaced, make
an adjustment in accordance with the procedure described
below.
The neutral position of the forward-reverse lever (1) and
the maximum stroke on the forward and reverse side are
positioned by notches.
①
Firmly secure the forward-reverse lever (1) in the neutral
position.
②
Firmly secure both ends of the control cable (5) and rod (3).
Specified dimension of rod (3)
a: 290 mm (11.4 in.)
Specified dimensions of control cable (5) ends
b: 238 mm (9.37 in.)
c: 209 mm (8.23 in.)
③
Confirm the stroke of the control lever (6) on the
propulsion pump side.
Specified dimension of control lever (6)
d: 28 mm (1.1 in.)
④
After the work is completed, confirm the following items:
The forward-reverse lever operates smoothly.
The stroke of the control lever (6) on the propulsion pump
side is the specified dimension.
The F-R lever switch (2) should not operate with the
forward-reverse lever in the neutral range.
The backup buzzer switch (4) should operate when the
forward-reverse lever is shifted into the reverse side.
•
•
★
★
★
•
•
•
•
a
b
1
5
2
3
4
SW800- -09007
6
c
d
SW800- -09008