Sakai SW800-II, Shop Manual

Page: 122 / 258

6-026
VIBRATORY DRUM
WARNING
When standing the drum, use wooden blocks of
sufficient strength to securely support the drum.
2) Stand the drum (46) with its propulsion motor mounting
side facing up.
(NOTICE)
The side on which no ø10 round bar is installed is the
propulsion motor side.
Drum (46)
SW800- : 1,500 kg (3,307 lbs.)
SW850- : 2,100 kg (4,630 lbs.)
3) Lift the housing subassembly with a crane and install it in
the vibratory drum.
(NOTICE)
When installing the housing subassembly, take care
not to allow the O-ring to protrude from the fitting
groove.
Housing subassembly
SW800- : 60 kg (132 lbs.)
SW850- : 75 kg (165 lbs.)
WARNING
Carry out the work in an unstrained posture using a
work stool or the like.
4) Secure the housing subassembly to the drum with the
sixteen bolts (1) and washers.
Bolts (1)
SW800- M16×50: 265 N·m (196 lbf·ft)
SW850- M20×60: 540 N·m (398 lbf·ft)
•
•
1
SW800-06056
Housing
subassembly
SW800-06055
Housing
subassembly
SW800-06054
46
Wooden block