Sakai SW800-II, Shop Manual

Page: 129 / 258

6-033
VIBRATORY DRUM
13-2) Apply a thin coat of gear oil to the surface of the
vibrator bearing (12) to be press-fitted.
Drive the vibrator bearing (12) into the axle shaft (13).
(NOTICE)
Take care not to damage the bearing when installing
it.
13-3) Lift the axle shaft subassembly with a crane and
reverse it.
Apply a thin coat of gear oil to the surface of the inner
race of the roller bearing (37) to be press-fitted.
Install the inner race of the roller bearing (37).
Axle shaft subassembly : 75 kg (165 lbs.)
13-4) Install the plugs (39) on the axle shaft subassembly.
Apply sufficient amount of lithium-based grease to the
roller surface of the roller bearing (37).
•
•
•
•
•
SW800-06075
37
Axle shaft subassembly
Wooden block
SW800-06074
12
13
SW800-06076
37
39
Axle shaft subassembly