Sakai SW800-II, Shop Manual

Page: 95 / 258

6-003
VIBRATORY DRUM
2. REMOVAL AND INSTALLATION OF VIBRATORY DRUM
2-1. Removal of Vibratory Drum
1) Prior to disassembly of vibratory drum, completely drain
water spray tank and fuel tank.
Water spray tank
SW800- : 500 L×2 (132 gal.×2)
SW850- : 600 L×2 (159 gal.×2)
Fuel tank
SW800- : 220 L (58 gal.)
SW850- : 250 L (66 gal.)
2) Cut cable tie (1) binding wiring harnesses which are
connected to water spray pump.
Remove wiring harness (2) from pump.
3) Joint front frame and rear frame with steering lock bar (3).
WARNING
When lifting the vehicle body, use an appropriate hoist
of sufficient strength. Confirm that the surrounding area
is safe, and work in a natural, unstrained posture.
Also, to firmly secure the vehicle body, use a support
stand of sufficient strength.
4) Lift the frames with a crane.
With the drum lifted a little off the ground, place support
stands under both sides of each frame to hold the vehicle
body in place. (The front and rear frames are structurally
identical.)
Front frame Rear frame
SW800- : 4,750 kg (10,470 lbs.) 5,150 kg (11,355 lbs.)
SW850- : 5,740 kg (12,655 lbs.) 6,230 kg (13,735 lbs.)
•
•
SW800-06001
2
1
3
SW800-06002
SW800-06003
Support stand
Support stand