Sakai SW800-II, Shop Manual

Page: 137 / 258

6-041
VIBRATORY DRUM
25) Apply a thin coat of grease to the O-ring (34).
Install the O-ring (34) on the vibrator motor (27).
26) Secure the vibrator motor (27) in place with the four bolts
(30).
(NOTICE)
When installing the vibrator motor, take care not to
allow the O-ring to protrude from the fitting groove.
Bolts (30): M10×30: 60 N·m (44 lbf·ft)
WARNING
Be careful because reversing the vibratory drum is
dangerous work. Confirm that the surrounding area is
safe, and work in a natural, unstrained posture.
27) Lift the drum (46) with a crane and reverse it. Then, stand
the drum with the propulsion motor side facing up.
Drum (46)
SW800- : 1,980 kg (4,365 lbs.)
SW850- : 2,670 kg (5,886 lbs.)
•
•
SW800-06098
34
27
SW800-06099
27
30
SW800-06100
46
Wooden block