Sakai SW800-II, Shop Manual

Page: 29 / 258

2-006
SPECIFICATIONS
2-4. Steering
Classi -
fication
Item Standard value Remarks
Steering
Play in steering wheel
5 to 10 mm ( 0.2 to 0.4 in. )
Steering wheel
circumference
0.5 mm ( 0.02 in. ) or less
Steering column shaft
direction
2-5. Brakes
Classi -
fication
Item Standard value Remarks
Brakes
Clearance between brake pedal and
floorboard (as installed) 136 mm (5.4 in.)
Note 1: See dimensions
SW880-02001
Note 1
Note 2
Clearance between brake pedal and
floorboard (when pressed down) 80 mm (3.1 in.)
Note 2: See dimensions
Propulsion motor inner brake wear
limit
Thickness of disc assembly (7 discs)
18.5 to 19.1 mm (0.73 to 0.75 in.)
Note 3: See dimensions
Allowable when thickness is within this range.
Replace all 7 discs when thickness becomes
18.5 or less.
SW880-02002
Note 3
2-6. Water System
Classi -
fication
Item Standard value Remarks
W
ater
system
Water spray pump discharge
pressure
0.26 MPa (38 psi )
2-7. Oil and Grease Capacity
Classi -
fication
Item
Standard value Remarks
SW800-
Ⅱ
SW850-
Ⅱ
Oil / Grease
capacity
Engine oil 10 L ( 2.6 gal. )
Coolant ( radiator) 17.0 L ( 4.5 gal. )
Propulsion motor gear oil
(front and rear)
3.2 L ( 0.85 gal. ) 3.6 L ( 0.95 gal. )
Vibrator case gear oil (front and rear) 19 L ×2 ( 5.0 gal. ×2 ) 22 L ×2 ( 5.8 gal. ×2 )
Hydraulic oil tank 80 L ( 21 gal. )
Fuel tank 220 L ( 58 gal. ) 250 L ( 66 gal. )
Water spray tank 500 L ×2 ( 132 gal. ×2 ) 600 L ×2 ( 159 gal. ×2 )