Sakai SW800-II, Shop Manual

Page: 125 / 258

6-029
VIBRATORY DRUM
③
Put the eccentric shaft (4) (propulsion motor side) on the
wooden blocks with its splined portion facing up.
④
Apply a thin coat of gear oil to the bearing mounting
surface of the eccentric shaft (4).
Lift the housing subassembly with a crane and install it on
the eccentric shaft (4).
(NOTICE)
Install the housing subassembly taking care not to tilt
the vibrator bearing inner race.
Housing subassembly: 30 kg (66 lbs.)
⑤
Install the retaining ring (45) on the eccentric shaft (4).
(NOTICE)
Confirm that the retaining ring (45) is securely fitted in
the groove.
•
•
•
SW800-06063
4
Lift with crane.
Housing
subassembly
SW800-06064
4
45
SW800-06062
4
Wooden block