Sakai SW800-II, Shop Manual

Page: 141 / 258

6-045
VIBRATORY DRUM
37) Lower the bracket subassembly while keeping it level and
install it on the spigot joint of the propulsion motor (53).
(NOTICE)
Be sure to install the bracket subassembly correctly
in relation to the position of the propulsion motor (53).
38) Secure the bracket subassembly to the propulsion motor
(53) with the sixteen bolts (54) and washers.
Bolts (54)
SW800- M16×50: 265 N·m (196 lbf·ft)
SW850- M20×60: 540 N·m (398 lbf·ft)
39) Lift the assembled drum assembly with a crane and lay it
with the ø10 round bar on the vibrator motor side facing
down.
Hold the drum assembly in place with chocks.
Drum assembly
SW800- : 2,280 kg (5,026 lbs.)
SW850- : 3,080 kg (6,790 lbs.)
•
•
SW800-06111
53
54
SW800-06110
53
SW800-06112
Gauge port
(drain plug)
Oil supply plug
Chock
Chock
Ǿ
10 round bar