Sailor 250 FleetBroadband, User Manual, Page: 88 / 288

Chapter 3: Operating the system
72 Using a computer
Activating a data connection with an SMS
To be able to activate a data connection on the terminal from a remote
location, the terminal must be set up as described in
Remote activation on
page 191.
Send an SMS to the mobile number of the terminal. The activation SMS must
have the following format for activating and deactivating a connection:
•
ACTIVATE <
name of network user group
>:<
name of profile
>
<
password
>
•
DEACTIVATE <
name of network user group
>:<
name of profile
>
<
password
>
For more information on network user groups see Setting up the network user
groups on page 145.
Accessing the terminal using web interface
After preparing the terminal as described in the previous sections, do as
follows to access it:
1. Make sure your remote computer has access to the Internet.
2. On the remote computer, open your web browser.
3. Enter the IP address of the terminal followed by a colon and the port
number
http://<ip address>:<incoming port> .
Activation SMS examples
Standard data connection in the
Default network user group
ACTIVATE default
group:standard
1234567890
Streaming 32 connection in the
network user group Group 0
DEACTIVATE Group
0:streaming 32
1234567890