Sailor 250 FleetBroadband, User Manual, Page: 124 / 288

Chapter 4: Using the web interface
108 Setting up the interfaces
You can also set up the local IP address used by the connected devices to
access the terminal. The drawing below shows the default setup.
To change the local IP addresses, do as follows:
1. From the left navigation pane, select SETTINGS > LAN .
2. At DHCP status , select Enabled (recommended for most purposes), or
Disabled .
Local IP addresses
(default setup)
Terminal
Device 1
Device 2
192.168 .0.1
192.168 .0.1
assigned by the
terminal (DHCP)
assigned by the
terminal (DHCP)