Sailor 250 FleetBroadband, User Manual, Page: 206 / 288

Chapter 4: Using the web interface
190 Administration
2. Select whether remote access should be Enabled or Disabled for the web
server and/or for AT commands.
3. Type in the Incoming port numbers to use for the web server and for AT
commands.
4. Under TRUSTED IP ADDRESSES , type in the IP addresses of the devices you
want to give access to the terminal.
5. Click Apply .
If Static IP is included in your airtime subscription, we recommend using this
static public IP address for the terminal in order to provide easy access to the
terminal.
After preparing the terminal and activating the connection you can access the
terminal from one of the trusted IP addresses, using the incoming port defined
in the Incoming port field.
• For information on how to prepare the terminal for remote activation of a
data connection, see the next section.
• For information on how to access the terminal, see Accessing the terminal
from a remote location on page 71.
• For information on how to set up a static IP address, refer to step 7 on
page 148 in the section
Editing a network user group .
Note
The port number must be available at your service provider.
Note
You must activate a connection in the terminal before you can access
the terminal.